Warex >  AOC & DAC Cabling >  Passive Copper Cable >  WDC-QSFP/4SFP-P3M
Warex >  AOC & DAC Cabling >  Passive Copper Cable >  WDC-QSFP/4SFP-P3M

WDC-QSFP/4SFP-P3M

Type:

DataRate:

FormFactor:

Length:

WDC-QSFP/4SFP-P3M

QSFP to 4 SFP+ Passive Copper Cable 40Gbase-CR4 3M 0~70 °C MSA Compliant

Passive Copper Direct Attach Cables Breackout - Passive DAC Breackout

WareX QSFP+ to 4SFP+ Passive Copper Direct Attach Breakout Cable make a great cost-effective interconnect solution to IT professionals by providing much needed space for data centers and cost cuts. These cables allow you to connect your QSFP+ and SFP+ Switches and Network cards without upgrading your entire data center or storage array. They can be used for QDR infiniBand, 40 Gigabit Ethernet and 10Gigabit applications. Each QSFP+ to SFP+ cable features a single QSFP+ connector (SFF-8436) rated for 40-Gb/s on one end and 4 SFP+ connectors (SFF-8431), each rated for 10-Gb/s, on the other.

Features

  • Description: QSFP+ to 4 SFP+ Passive Copper Direct Attach Breakout Cable
  • Connector 1: 1x QSFP+ 40GBASE Rated Connector (SFF-8436 Compliant)
  • Connector 2: 4x SFP+ 10GBASE Rated Connectors (SFF-8431 Compliant)
  • Up to 10.3125GBASE transfer rate per SFP+ channel (40GBASE aggregate)
  • Length: 3 meter
  • Wire AWG: AWG30
  • High reliability
  • Economically Links up a QSFP+ port with an Upstream 10GbE-SFP+ Switch
  • Robust Zinc die-cast SFP+ & QSFP connectors with pull-to-release latching
  • Low cross-talk and pair-to-pair skew maintains signal integrity
  • Fully compliant to the latest SFP+ & QSFP MSA (Multi-Source-Agreement)
  • Fully RoHS compliant for environmental protection
  • Designated form factor and electrical compliance for QDR InfiniBand


Applications

  • Supports all current 10-Gigabit Ethernet and 40-Gigabit Ethernet standards
  • Protocol agnostic support of QDR InfiniBand, SAS & Fibre Channel
  • InfiniBand SDR, DDR
  • Ethernet 1G, 10G
  • FibreChannel
  • Rack-to-Rack, Shelf-to-Shelf Interconnect
  • Networking
  • Storage
  • Hubs, switches, routers, servers
Form FactorQSFP+ to 4 SFP+
Data Rate40GBASE-CR4
MediaDirect attached copper breakout
Device TypePassive
AWGAWG 30
Operating Temperature0~70 °C
CompatiblityMSA Compliant
Length3 meters
Safety & EmissionCE , FCC, RoHS

WareX has a policy of continuous improvement. Specifications are subject to change without notice.
Is an important specification missing? Did you spot an error? Please let us know how we can make this information more useful to you.