Warex >  Ethernet Media Converters >  Fast Ethernet >  WFA101-13S20
Warex >  Ethernet Media Converters >  Fast Ethernet >  WFA101-13S20

WFA101-13S20

Media:

FormFactor:

Distance:

Wavelength:

Connector:

Type:

InterfaceFiber-UTP:

WFA101-13S20

Stand-Alone Unmanaged 1310nm Singlemode 20KM Dual SC-UTP 100M-FX to 10/100M-TX DC5V 0°C~55°C RoHS Compliant

WAREX WMFA101-13S20 is a Fast Ethernet Media Converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the media converter is designed for use with single-mode fiber cable utilizing the SC-Type connector. This converter supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data and will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.

This device is designed to be used as a stand alone (no chassis required) or with our chassis system ,Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port and front panel status LEDs.

Features

  • Auto negotiation of 10/100Mbps and auto MDI/MDIX for TX port
  • Provide switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port
  • Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
  • Extend fiber distance up to 20km
  • Easy-to-view LED indicators provide status to monitor network activity easily
  • External power supply


Applications

  • Network Communication
  • FTTH / FTTB / FTTx
  • ISP Backhaul Networking
Form FactorFast Ethernet Fiber Media Converter
Data Rate10/100Mbps
Fiber Interface1x 100Base-FX
UTP Interface1x 10/100Base-TX
Standards and Protocols

IEEE 802.3,IEEE 802.3u,IEEE 802.3x

Wavelength

1310nm

MediaSingle Mode Fiber
Reach20km
Device TypeUnmanaged
ConnectorDual SC
Operating Temperature0°C~55°C
Application

Network Communication
FTTH / FTTB / FTTx
ISP Backhaul Networking

Relative Humidity5%~90%
Power SupplyExternal Power Supply
LED

TX LINK, FX LINK, TX ACT, FX ACT, PWR, FDX

Safety & EmissionCE , FCC, RoHS
Storage Temperature-25°C~+70°C
Dimensions

External: 94mm x 70mm x 26mm
Internal: 140mm x 110mm x 30mm

Gross Weight

External : 0.4kg
Internal: 0.5kg


WareX has a policy of continuous improvement. Specifications are subject to change without notice.
Is an important specification missing? Did you spot an error? Please let us know how we can make this information more useful to you.