Warex >  Ethernet Media Converters >  Fast Ethernet >  WFA101-B35S40
Warex >  Ethernet Media Converters >  Fast Ethernet >  WFA101-B35S40

WFA101-B35S40

Media:

FormFactor:

Distance:

Wavelength:

Connector:

Type:

InterfaceFiber-UTP:

WFA101-B35S40

Stand-Alone Unmanaged Tx1310/Rx1550nm Singlemode 40KM Single SC-UTP 100M-BX to 10/100M-TX DC5V 0°C~55°C RoHS Compliant

WAREX WFA101-B35S40 is a Fast Ethernet media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, It takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, This device is designed for use with single-mode fiber cable utilizing the SC-Type connector. The device supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. So the other end device to cooperate with this device should work at 1550nm on transferring data and at 1310nm on receiving data. 
It will transmit at extended fiber optic distances utilizing single-mode fiber up to 40 kilometers.


This device is designed to be used as a stand alone device or with WAREX chassis system, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. 

Features

  • Auto negotiation of 10/100Mbps and auto MDI/MDIX for TX port
  • Provide switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port
  • Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
  • Adopts WDM technology, transmitting and receiving data on one single fiber
  • Extend fiber distance up to 40km
  • Easy-to-view LED indicators provide status to monitor network activity easily
  • External power supply


Applications

  • Network Communication
  • FTTH / FTTB / FTTx
  • ISP Backhaul Networking
Form FactorFast Ethernet Fiber Media Converter
Data Rate10/100Mbps
Fiber Interface1x 100Base-FX
UTP Interface1x 10/100Base-TX
Standards and Protocols

IEEE 802.3,IEEE 802.3u,IEEE 802.3x

Wavelength

Tx1310nm/Rx1550nm

MediaSingle Mode Fiber
Reach40km
Device TypeUnmanaged
ConnectorSingle SC
Operating Temperature0°C~55°C
Application

Network Communication
FTTH / FTTB / FTTx
ISP Backhaul Networking

Relative Humidity5%~90%
Power SupplyExternal Power Supply
LED

TX LINK, FX LINK, TX ACT, FX ACT, PWR, FDX

Safety & EmissionCE , FCC, RoHS
Dimensions

External: 94mm x 70mm x 26mm
Internal: 140mm x 110mm x 30mm

Gross Weight

External : 0.4kg
Internal: 0.5kg


WareX has a policy of continuous improvement. Specifications are subject to change without notice.
Is an important specification missing? Did you spot an error? Please let us know how we can make this information more useful to you.